Study of the microstructure evolution of alloy structural steel and inhomogeneity effect of the microscale pulsed currents during current-assisted plane strain compressions by modeling a novel cellular automata method

Abstract

The current-assisted forming process is considered to be a novel process that utilizes the electroplasticity effect to reduce the deformation resistance of difficult-to-deform metals and to refine the grain size while improving the mechanical properties of the part. However, the lack of understanding of the mechanisms by which pulsed current affects grain refinement still makes it difficult to experimentally develop analytical or empirical models of the relationship between grain size, pulse current parameters, and deformation amount. It will seriously hinder the further development and application of the current-assisted forming process. To reveal the mechanism of grain refinement coupling with electroplasticity, a series of Electron Back Scattering Diffraction observation tests were carried out after current-assisted plane strain compressions. The results show that the grain orientation spread value of the pulse current condition is lower than that of the non-current condition, while the refined grain area percentage is higher than that of the non-current condition. Based on the microstructure observation results, a cellular automata model for grain refinement is proposed. This consists of a dislocation density evolution, sub-grains generation, grain fragmentation, and a grain orientation rotation algorithm. To study the electroplasticity of the grain refinement process, the cellular automata model is also embedded with a finite difference numerical algorithm for solving the microscopic current density distribution of the model. The cellular automata model simulation results show that the error of grain size accuracy of this cellular automata model under non-current and pulse current conditions is 10.48% and 8.55%, respectively. It shows that the model can accurately characterize the grain refinement behavior of the current-assisted plane strain compression. The simulation results reveal the deep mechanism of pulsed current promotion on grain refinement, i.e., an inhomogeneous microstructure leads to uneven distribution of pulse current density. The inhomogeneous current distribution will further increase the grain refinement rate in the coarse-grained regions, thus increasing the proportion of the refined grain regions in the microstructure and leading to a relatively more homogeneous microstructure under pulse current conditions. The cellular automata model accurately reveals the mechanism of electroplasticity on the grain refinement. The model will serve as a crucial theoretical reference in designing current-assisted forming process routes to ensure excellent microstructure and properties in manufactured parts. It will enhance the widespread utilization of current-assisted forming process.