Abstract
A comparative assessment of the effect of two modifiers on the low-temperature properties of BND 90/130 bitumen was investigated using Asphalt Binder Cracking Device (ABCD test) and Dynamic Shear Rheometer (DSR 4-mm test). These modifiers are styrene-butadiene-styrene block copolymer (SBS) and active powder of discretely devulcanized rubber (APDDR) - powder elastomeric modifier obtained by high-temperature shear grinding of waste tire crumb rubber. ABCD results of RTFO-aged samples showed clear and gradual decrease of the ABCD cracking temperature (improvement) for all BC as the modifier concentration increases. It is noteworthy that the Bitumen Composites (modified bitumens) were cracking at higher strain and fracture stress values compared to neat bitumen. Results of DSR-4 mm test showed a decrease in the complex shear modulus (G*), storage modulus (G¢) and loss modulus (G²) BC compared to the neat bitumen. It is shown that bituminous composites have no maximum on the Cole-Cole diagram (dynamic vitrification) at T = -28°C which is observed in the neat bitumen.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
