Study of the heat transfer and analysis of the surface characteristics of robot spray painting by using Taguchi method and ANOVA analysis

Abstract

In this investigative research work, the surface characteristics of normal paint and multiwall carbon nanotube (MWCNT) paint-coated substrates are studied. The experiments are conducted using ABB IRB 1410 Robot and the end effector of the robot is retrofitted with a high-volume low-pressure atomizer paint spray gun. The nanopaint is prepared by ultrasonication by placing 1 gram of MWCNT in a polyurethane commercial base paint (500 ml). Taguchi design of experiments is used to identify the most efficient use of procedure parameters using the L9 orthogonal array table. Heat transfer of the substrate is found by temperature measurements of the convective heat transfer through extended surfaces. Surface morphology is studied by scanning electron microscope and upright microscopy. Analysis of variance technique is used to find the most influencing input parameters and contribution of values to maximizing surface finish and minimizing the heat transfer effect. The study shows that there is an enhancement in surface finish and minimization of heat transfer in the nanopaint coated substrate when compared with normal paint application using the ABB robot.