Study of the fabric structure influence on the physical-mechanical and technological properties of knitted products

Umarjon Meliboev,Kurbonali Kholikov,Nozimjon Jurabayev,Shakhboz Shogofurov,O. Tursunov

doi:10.1051/e3sconf/202130403030

Umarjon Meliboev, Kurbonali Kholikov + Show 3 more

Open Access

https://doi.org/10.1051/e3sconf/202130403030

Copy DOI

Abstract

Three kinds of knitted fabrics with high shape retention capacity equipment LONG-XING SM 252 (China) 12-grade flat needle loom were produced, their technological characteristics were compared, and graphical records were supplied in this article based on experimental samples of knitted rubber fabric. The developed variants of knitted fabric differ from each other in pattern type, report, shape retention feature and a number of other indicators. Physical and mechanical properties of the obtained samples were determined experimentally on modern equipment installed in the testing laboratory of the Namangan Institute of Engineering Technology.

Highlights

When designing any new knitted fabric or knitted product, the fabric is based on parameters such as loop pitch A, loop row height B, loop strip length L, hygienic, aesthetic and exploitative requirements [1, 2]
Knowing that each of these features depends on the performance of the knitted fabric, it is possible to choose the optimal variant of the knitting process
The nature of the raw material used, the type of fabric and the method of processing are the main factors influencing the performance of any knitted fabric

Summary

Introduction

When designing any new knitted fabric or knitted product, the fabric is based on parameters such as loop pitch A, loop row height B, loop strip length L, hygienic, aesthetic and exploitative requirements [1, 2]. Properties and performance of transverse and longitudinal knitted fabrics with different structure can meet the requirements for technical and upper knitted products in production practice [3]. The nature of the raw material used, the type of fabric and the method of processing are the main factors influencing the performance of any knitted fabric. Knitted fabric can be composed of different fabrics This condition can change the structure of knitted fabric, thereby affecting its technological and physico-mechanical performance. Technological and physico-mechanical properties of knitted fabric can be determined using the following methods: 1. When it is not necessary to determine the knitted fabric by calculating the performance (for example, in the calculation of trim, tire, bead details, etc.), or when the technological performance of knitted fabric is calculated using existing formulas, significantly different from the actual

Polyacrilnitryl

Results and Discussion

Conclusion