Abstract
High purity Al-5Si (wt. %) master alloys containing different levels of Sr additions were manufactured in an arc melter under high vacuum. The alloys were melt-spun which resulted in the production of thin ribbons. The microstructure of the ribbons consisted of Al matrix and entrained eutectic droplets. The ribbons were subsequently investigated using differential scanning calorimetry (DSC) and conventional transmission electron microscopy (CTEM) to examine the effect of Sr on the droplet undercooling and nucleation of eutectic silicon. The results indicate that the addition of Sr increases the eutectic droplet nucleation undercooling (ΔT). This may be due to Sr poisoning of the AlP phase.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
