Abstract
Computational fluids dynamics (CFD) modelling has been carried out for a spacer-filled membrane channel using ANSYS FLUENT 14.0. The effect of spacer angles relative to the feed flow direction and different spacer shape combinations on velocity magnitude, wall shear stress, pressure drop and power number were investigated. From the results, spacer angle of 63.565° is the best orientation as it can generate the highest shear stress and reasonably lower power number compared to other spacer angles. Although the combinations of spacer shape did not significantly improve the average wall shear stress, it helped in reducing the pressure drop of the channel. The combination of triangular and circular spacers provided lower Power number, and hence lower energy consumption was required compared to pure triangular spacer. The current results indicated that a combination of triangular and circular spacers can be employed to offer better saving in energy consumption.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.