Abstract
The purpose of this research is to investigate the durability damage law for ultrahigh toughness cementitious composites (UHTCCs) under freeze–thaw environments and impact resistance. In this study, UHTCCs with fiber length-to-diameter ratios of 5/30, 8/30, 12/20, 12/30 and 12/48 were tested for impact resistance and freeze–thaw cycles. The freeze–thaw cycle process and impact resistance process for UHTCC are comprehensively analyzed and evaluated in terms of mass loss, compressive strength loss, relative dynamic elastic modulus loss and impact resistance number. The freeze–thaw damage prediction model for the relative dynamic elastic modulus of the UHTCC is established based on the regularity of the measured data for the relative dynamic elastic modulus of UHTCC and also on the GM(1,1) power model. The accuracy and reliability of the GM(1,1) power model is analyzed using the relative error, absolute correlation degree, mean variance and probability of small errors. According to the evolution law of the impact resistance number of the UHTCC, the impact damage prediction model for UHTCC is established based on the Weibull distribution model, and the accuracy of the model is analyzed by using the decision coefficient R2. The results show that UHTCC has high durability performance, and the durability performance of UHTCC at a length-diameter ratio of 12/48 is optimal. The freeze–thaw damage evolution model and impact damage evolution model established in this research are sufficiently realistic, the average relative error of the GM(1,1) power model is less than 5%, and the coefficient of determination R2 of the Weibull distribution model is greater than 0.93, which effectively reflects the damage development process for concrete under freeze–thaw and impact environment with high fitting accuracy.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.