Abstract
The configuration of the reactor influences the digestion process and thus the product yields; other factors such as the rate of biogas production or biogas loss also affect the process specifically with high solid configuration. With these in mind, the ORganic WAste REsearch (ORWARE) anaerobic digestion sub-model was modified to be able to study solid-state anaerobic digestion (SS-AD) (using plug-flow reactor). The simulation results from the updated model agreed with the operational data with respect to methane yield, digestate yield and energy turnover. The model was found to be sensitive to changes in feedstock composition but to a lesser extent to changes in process temperature and retention time. By applying the model on several cases of liquid anaerobic digestion (L-AD), it was noticed that L-AD at mesophilic condition with 25 retention days seemed to be superior to other cases of L-AD with regard to energy turnover. However, even if similar methane production were observed for L-AD and SS-AD, the model suggested higher energy turnover for the case of SS-AD at thermophilic condition, being 10% more in average in comparison with cases of L-AD.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
