Abstract
In this paper, structural, dielectric and electrical properties of calcium copper titanate and PbZr0.65Ti0.35O3 ceramic composite with composition (1-x) CaCu3Ti4O12 – (x) PbZr0.65Ti0.35O3 (where x = 0.00, 0.30, 0.50, 0.70 and 1.00) has been distinguished. The CaCu3Ti4O12 sample was prepared by employing a high temperature solid state reaction technique and PbZr0.65Ti0.35O3 synthesized by sol-gel route. X-ray diffraction (XRD), scanning electron micrograph (SEM), FT-IR spectrum (IR) was used to reach the structural properties of the studied compounds. The XRD and IR studies confirm the formation of pure phase for x = 0.00 and 1.00 concentrations i.e cubic and tetragonal, respectively. The SEM show change in the grain distribution, size and shape at addition of PbZr0.65Ti0.35O3. Dielectric measurements were made by using an impedance analyzer, the results show that the dielectric constant of the CCTO/PZT composite is greater than that of pure CCTO and than that of pure PZT. The temperature dependence of the ac conductivity indicated that the conduction process is due to singly and doubly ionized, and frequency dependence of the ac conductivity of composites follows Jonscher’s power law.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: IOP Conference Series: Earth and Environmental Science
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.