Study of the deorbit sail damage under the combined effects of atomic oxygen erosion and material defects

Abstract

In order to help control the spread of space debris and junk, deorbit sail devices have been used for deorbiting techniques; however, this approach is still considered risky due to potential failure or malfunction as it need to be exposed to the harsh space environment for a prolonged period of time, particularly in low-Earth orbit. China has made new strides forward in managing space junk, as it has successfully unfolded a 25-square-meter deorbit sail developed by the Shanghai Academy of Spacecraft Technology in-orbit for the payload capsule of a recently launched rocket. Accordingly in this paper, a full life-cycle modelling based on Monte Carlo method is developed to reveal the damage behavior of the 25-square-meter deorbit sail surface under the combined effects of atomic oxygen erosion and deorbit sail defects. The simulation results show that as the atomic oxygen fluence increases and the material defect width widens, the interaction effect of the two factors becomes more and more pronounced, which decisively influences the erosion rate of the sail surface. Morphological characterization of aluminized film PET material, activated silanisation modified material and plasma-polymerization coating material before and after atomic oxygen erosion combined defects is carried out and the atomic oxygen erosion of the deorbit sail surfaces is quantitatively assessed. The assessment results show that compared to the PET material and activation silanisation surface modification material, the plasma polymeric coated material showed much better flexibility, folding resistance and irradiation resistance to prevent geological fold and to shield from the atomic oxygen erosion in space. The atomic oxygen erosion combined defects assessment method studied in this paper provides valuable reference data for the subsequent serialisation of deorbit sail products and other typical lightweight film materials for space applications.