Abstract
Electron Probe Micro Analyzer (EPMA) was used to study the grain boundary sensitization behaviour of high-nickel austenitic stainless steel 904L. After sensitization for different ageing times at 650 ℃, 904L was corroded in 1 M HCl for 7 days. There was an obvious 3 μm-wide corrosion-sensitized zone around the grain boundary. The EPMA results showed no significant segregation of elements around the grain boundaries. Transmission electron microscopy (TEM) results showed that the σ phase was detected along the grain boundary. The σ phase caused discontinuity in the passivation film near the grain boundary and the grain boundary sensitization of 904L.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.