Abstract
A study was conducted to investigate the effect of activator types KOH, ZnCl2, and H3PO4 on the specific surface area of porous carbon and its performance as a Li-S battery. Porous carbon was synthesized from candlenut shells through a carbonization process at 700 °C using three types of activator solutions with a concentration of 0.36 M. The porous carbon activated with KOH achieved the best results, with a specific surface area of 681 m²g-1. The porous carbon candlenut shell-sulfur (PCCS-S) composite was obtained by the solid-state reaction method in a ratio of 1:2.5 w% and heat-treated at 155 °C to form the PCCS-S composite. The PCCS-S composite was then made into a slurry and coated onto Al-foil to obtain a layer of electrodes with a thickness of 200 µm. The PCCS-S cathode was then assembled into a coin battery with lithium metal as the anode and an electrolyte of 1.0 M LiTFSi solution dissolved in 1,3-dioxolane (DOL) and 1,2-dimethoxyethane (DME) (v/v, 1:1). Charge-discharge characterization was carried out at a charge rate of 1 C for 50 cycles. Characterization shows that the performance of the PCCS-S KOH composite cathode Li-S battery is stable at a specific capacity of 324 mAhg-1 after the first 10 cycles, with an average Coulombic efficiency of around 86.8 %.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
