Abstract
In machining operation, the surface quality is one of the most important requirements for many workpieces. Because of the special physical and chemical properties, good-machined surface quality becomes a key issue to solve in machining Inconel 718. In this paper, PVD-TiAlN-coated carbide tools were used to turn Inconel 718. Based on observing the tool wear and machined surface morphology, the main factors affecting surface quality at different cutting speeds were analyzed. The optimal cutting temperature was calculated, according to the above analysis and Archard adhesion wear model, and further cutting parameters optimization was conducted, on the basis of the proposed optimal cutting temperature. The optimized cutting parameters based on optimal cutting temperature can be considered to improve surface quality.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: The International Journal of Advanced Manufacturing Technology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.