Abstract
Titania nanofibers (NFs) and nanorods (NRs) with different diameters were prepared by electrospinning method. Photovoltaic properties of NR photoelectrodes were investigated with FESEM microscope, spectrophotometer and photovoltaic devices. It is found that titania NR electrodes with the diameter of 193 nm had the best conversion efficiency. Electrochemical modelings demonstrated the electron behaviors of anode layer and electrolyte. It is also determined that titania NR electrode with the diameter of 193 nm had the maximum electron life time value of 3.6 mS, the most chemical capacitance (Cµ) of 166.16 µF and the least recombination resistance (Rtr) of 705.3 Ω. Keywords: Dye sensitized solar cells, nanorod, nanostructure, thin-film.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: International Journal of Sensors Wireless Communications and Control
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
