Study of steam explosion pretreatment and preservation methods of commercial cellulose

Abstract

Steam explosion (150–200 °C, 5–30 min) was performed on a commercial cellulose presented in two configurations (fiberized and compact sheet) and its effect on their chemical and physical properties was studied, along with the influence of two different preservation methods (acetone drying and freezing) after pretreatment. No degradation compounds were produced during pretreatment, although solid recovery (RS) decreased with temperature from 90% to 62%. Similar particle size and surface conditions (increased porosity) were found for both types of pretreated samples despite the extremely different initial configuration. Crystallinity diminished for 150 °C samples, but 200 °C pretreatment promoted recrystallization. Pretreatment also reduced polymerization degree, although enzymatic accessibility did not improve. Both acetone and freezing processes extremely affected cellulose properties. Acetone drying counterbalanced crystallinity and enzymatic accessibility variations of pretreated samples, while decreasing polymerization degree. Freezing dramatically decreased enzymatic accessibility of pretreated samples down to 15.8%.