Study of spatial and temporal aging characteristic of catalyzed diesel particulate filter catalytic performance used for diesel vehicle

Abstract

Catalyzed diesel particulate filters (CDPFs) have been widespread used as a technically and economically feasible mean for meeting increasingly stringent emissions limits. An important issue affecting the performance of a CDPF is its aging with using time. In this paper, the effects of noble metal loadings, regions and using mileage on the aging performance of a CDPF were investigated by methods of X-ray diffraction (XRD), X-ray photoelectron spectroscopy and catalytic activity evaluation. Results showed that aging of the CDPF shifted the XRD characteristic diffraction peaks towards larger angles and increased the crystallinity, showing a slowing downward trend with the increase of the noble metal loadings. In addition, the increase of the noble metal loading would slow down the decline of Pt and Pt4+ concentration caused by aging. The characteristic temperatures of CO, C3H8 conversion and NO2 production increased after aging, and the more the noble metal loadings, the higher the range of the increase. But noticeably, excessive amounts of noble metals would not present the corresponding anti-aging properties. Specifically, the degree of aging in the inlet region was the deepest, the following is the outlet region, and the middle region was the smallest, which were also reflected in the increase range of crystallinity, characteristic temperatures of CO, C3H8 conversion and NO2 production, as well as the decrease range of Pt and Pt4+ concentrations. The increase of aging mileage reduced the size of the aggregates of the soot and ash in CDPFs, however, improved the degree of tightness between particles. Meanwhile Carbon (C) concentration in the soot and ash increased with the aging mileage.