Abstract
ABSTRACTDue to its high oxidation resistance, TaSiN is a promising candidate as an electrically conductive barrier layer for integration of high permittivity oxides in advanced memory devices. In this work, we report on the properties of TaSiN thin films deposited by reactive magnetron sputtering of a TaSi2 target. We have mainly studied the influence of deposition pressure and power density on film properties (composition, density, resistivity). The oxidation resistance of TaSiN films has been investigated at typical conditions for crystallization of perovskite dielectrics. The as-deposited and annealed samples were characterized using Rutherford backscattering spectroscopy and nuclear reaction analysis for atomic composition and XPS for chemical bonding. To study oxidation resistance, films have been processed in 18O2. The concentration depth profiles of 18O was measured after thermal treatments via the narrow resonances of 18O(p,α)15N at 151 keV (fwhm=100eV). The different results suggest that a pressure of 0.5 Pa, a power density of 2.63W/cm2 and a gas flow ratio N2/Ar of 5% allow to perform TaSiN films with high density, low resistivity and good oxidation resistance.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
