Abstract
Al2O3 compacts with various phases were prepared by hydrolysis and spark plasma sintering (SPS) process of Al powder. The bayerite (-Al(OH)3) phase was derived by hydrolysis of commercial Al powder with micron size, whereas the bohemite (AlO(OH)) phase was obtained by hydrolysis of nano Al powder synthesized by pulsed wire evaporation (PWE) method. Compaction as well as dehydration of both bayerite and bohemite was carried out simultaneously by SPS method, which is used to fabricate nano powder into dense compacts with a rapid heating rate of about 100 °C per min. under the pressure of 50 MPa. After compaction in the temperature ranges from 350 °C to 1100 °C, the bayerite and bohemite phases change into various alumina phases depending on the compaction temperatures. The bayerite shows the phase transition of Al(OH)3 -Al2O3 -Al2O3 -Al2O3 sequences. On the other hand, the bohemite experiences the phase transition from AlO(OH) to -Al2O3 at 350 °C showing AlO(OH) -Al2O3 -Al2O3 -Al2O3 -Al2O3 sequences.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
