Abstract
Abstract This present article evaluates the state of starvation in a journal bearing using acoustic emission (AE) and vibration measurement techniques. A journal bearing requires a constant supply of oil in an adequate amount to develop a hydrodynamic film, thick enough to separate the surfaces and avoid asperity contacts. On a microscopic level, the surface interaction under starved lubrication results in deformation and fracture of asperities. This causes a proportionate increase in AE and vibration. The AE activities resulting from asperities interaction have significant energy in the frequency range of 100–400 kHz with peak frequencies in the range of 224–283 kHz. Further, the peak frequency shifts from the higher to lower side as the asperity interaction transits from the elastic to plastic contact. This information derived from the spectral analysis of AE signals can be used to develop condition monitoring parameters to proactively control the lubrication and prevent bearing failure.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.