Abstract
Low-frequency excess noise was measured in a series of GaN epitaxial films deposited by RF-plasma assisted molecular beam epitaxy (MBE). The GaN epitaxial layers were grown on double buffer layers, each consisting of an intermediate-temperature buffer layer (ITBL) deposited at 690/spl deg/C and a conventional low-temperature buffer layer grown at 500/spl deg/C. The Hooge parameters for the as-grown films were found to depend on the thickness of ITBL with a minimum value of 7.34/spl times/10/sup -2/ for an optimal ITBL thickness of 800 nm. The observed improvements in the noise properties are attributed to the relaxation of residual strain within the material, leading to a corresponding reduction in crystalline defects.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.