Abstract
Load fluctuation characteristics have a great influence on drilling performance. So, study the influence of drilling kinematic parameters on the load fluctuation characteristics of PDC bit becomes more and more important. Gas drainage drilling experiment table was built and Gas drainage drilling experiment was carried out under different feed speed, different rotation speed and same drilling thickness with different feed speed and rotation speed. The results indicate that drilling torque decreases with the increase of rotation speed; vibration amplitude of drilling torque increases with increase of rotation speed. Vibration amplitude of feed resistance decreases from 90 r/min to about 240 r/min and then increases. The value of 240 r/min is minimum. Feed resistance and drilling torque increase with the increase of feeding speed. Vibration amplitude of drilling torque and feeding resistance increases with the increase of feeding speed. Feed resistance and drilling torque are almost equal with the same drilling thickness; meanwhile, vibration amplitude of drilling torque and feed resistance increases with the increase of feeding speed. It provides a good basis for setting the appropriate feeding speed and rotation speed in actual work.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
