Abstract
The development of unmanned ground vehicles and unmanned aerial vehicles requires high-precision navigation due to the autonomous motion and higher traffic intensity. The existing L1 band GNSS receivers are a good and cheap decision for smartphones, vehicle navigation, fleet management systems, etc., but their accuracy is not good enough for many civilian purposes. At the same time, real-time kinematic (RTK) navigation allows for position precision in a sub-centimeter range, but the system cost significantly narrows this navigation to a very limited area of applications, such as geodesy. A practical solution includes the integration of dual-band GNSS receivers and inertial sensors to solve high-precision navigation tasks, but GNSS position accuracy may significantly affect IMU performance due to having a great impact on Kalman filter performance in unmanned vehicles. The estimation of dilution-of-precision (DOP) parameters is essential for the filter performance as the optimality of the estimation in the filter is closely connected to the quality of a priori information about the noise covariance matrix and measurement noise covariance. In this regard, the current paper analyzes the DOP parameters of the latest generation dual-band GNSS receivers and compares the results with the L1 ones. The study was accomplished using two types of antennas-L1/L5 band patch and wideband helix antennas, which were designed and assembled by the authors. In addition, the study is extended with a comparison of GNSS receivers from different generations but sold on the market by one of the world's leading GNSS manufacturers. The analyses of dilution-of-precision (DOP) parameters show that the introduction of dual-band receivers may significantly increase the navigation precision in a sub-meter range, in addition to multi-constellation signal reception. The fast advances in the performance of the integrated CPU in GNSS receivers allow the number of correlations and tracking satellites to be increased from 8-10 to 24-30, which also significantly improves the position accuracy even of L1-band receivers.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
