Abstract
Currently, the ceramic inner container draws great attention in the field of induction heating pot. Based on the traditional roll-forming process for ceramic pot, a new kind process was proposed to fabricate ceramic inner container and synchronously embed stainless steel plate by one-step high temperature sintering. The key technology for this process is to avoid the oxidation of SUS430 stainless steel plate during the high temperature sintering for a longtime by coating a glass-ceramic layer. In this research, the glass-ceramic coating with excellent high temperature oxidation resistance was optimized. The influences of ZrO2 content in the coating slurry on the high temperature oxidation resistance and thermal shock resistance of SUS430 stainless steel plate with glass-ceramic coating were studied. Meanwhile, the coatings were characterized by Scanning Electron Microscopy, X-ray Diffraction and Thermal Expansion Analysis. The experimental results showed that the glass-ceramic coating was smooth and had excellent thermal shock resistance when the addition of ZrO2 reached 15wt%. The mass gain of the SUS430 stainless steel plate with glass-ceramic coating was only 0.453% after sintering at 1300°C for 10h in air atmosphere, which was less one percent than that of SUS430 stainless steel plate under the same sintering condition.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
