Abstract
Conventional tests of sinter strength such as the Tumbler test and the shatter test cannot predict the effect of transport parameters such as the drop height, conveying length, etc. on the amount of return fines generated during transport. In this work, various steps involved in transportation were simulated using customised drop and vibration tests, and the effect of sinter size, drop height and conveying time on the percentage of return fines and volume breakage was examined. Drop and vibration tests revealed that the extent of volume breakage is higher in case of larger sinter particles, but the percentage of return fines from various size fractions did not follow the corresponding trend in volume breakage. The contribution of various size fractions of sinter to generation of return fines was found to be in the order: 5–10 mm>20–30 mm∼30–40 mm>10–20 mm. For any size fraction, the percentage of fines generated was found to be linearly related to the drop height in the case of drop tests and logarithmically related to the vibration time in the case of vibration tests.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.