Abstract

GaN-based 2-D photonic crystal (PC) surface-emitting lasers (PCSELs) with AlN/GaN distributed Bragg reflectors are fabricated and investigated. A clear threshold characteristic under the optical pumping at room temperature is observed at about 2.7 mJ/cm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> with PC lattice constant of 234 nm. Above the threshold, only one dominant peak appears at 401.8 nm with a linewidth of 0.16 nm. The laser emission covers whole circular 2-D PC patterns of 50 mu m in diameter with a small divergence angle. The lasing wavelength emitted from 2-D PC lasers with different lattice constants occurs at the calculated band edges, showing different polarization angles due to the light diffracted in specific directions, corresponding exactly to Gamma -, <i xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">K</i> -, and <i xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">M</i> -directions in the <i xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">K</i> space. The PCSEL also shows a spontaneous emission coupling factor beta of 5 times 10 <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">-3</sup> and a characteristic temperature of 148 K. Furthermore, the coupled-wave model in 2-D hexagonal lattice is applied to distinguish the discrepancy in threshold power and the corresponding coupling coefficient. The results show that the lasing actions within Gamma, <i xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">K</i> , and <i xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">M</i> modes have a substantial relation between the threshold energy density and the coupling coefficient.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call