Abstract
The hard disk drive spindle is one of the critical mechanical components in hard disk drives (HDDs). It has great influence on overall performance, including track density, data-transfer rate, energy consumption, noise, and so forth. Nowadays, HDDs with higher density and speed, larger capacity, and smaller size are under active development. This requires that HDD spindles have fast rotating speed, excellent accuracy, and small size. However, ball-bearing spindles, which are widely used in current HDDs, cannot meet these requirements. HDD spindles supported by oil-lubricated spiral-groove bearings are considered to be a candidate to replace ball-bearing spindles. There is no oil-supply device in the bearing, and the flow characteristics of the lubricant in the bearing have a great effect on the performance of the spindle. In this article, the fluorescent method is used to study the flow characteristics of the lubricant in a spiral-groove bearing. The establishment and recovery of the lubricant film during start/stop of the spindle are observed. The effects of working conditions on the thickness and distribution of the lubricant film are investigated. The influence of oil supply on the performance of the bearing is also studied.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
