Abstract
ABSTRACT As a novel ignition approach, nanosecond repetitively pulsed discharge (NRPD)-based non-thermal plasma offers significant benefits such as low energy consumption, and lean operating conditions. However, there is no investigation conducted on the early flame kernel formation and development induced by non-thermal plasma. Therefore, in this paper, experiments of conventional spark and non-thermal plasma ignition systems in constant volume combustion chamber (CVCC) are conducted under gasoline engine relevant conditions: wide initial ambient pressures (6.5, 8.3, 11.3 bar), a range of equivalence ratios (0.7–1.0), EGR rates (10−25%), and cross flow speeds (0–30 m/s). The discharge energy of non-thermal plasma is of around 210 mJ, while a single spark event can generate energy from 65 mJ to 83 mJ depending on ambient conditions. A consecutive spark strategy is adopted to guarantee comparable total input energy to non-thermal plasma. The ignition delay and combustion phase obtained from the chamber pressure history are calculated. In the meanwhile, flame kernel radius, flame propagation rate, and flame front length ratio via schlieren images are quantified and analyzed. Results showed that the flame initiated by non-thermal plasma can maintain a robust flame kernel and propagates fast. Under high-speed cross flow and high EGR rate conditions, non-thermal plasma can maintain a robust flame kernel at early stage supporting the initial flame kernel to survive and improve its ignition probability. Considering the effects of the EGR ratio and high-speed cross flow on flame kernel development, non-thermal plasma ignition can efficiently enhance the flame propagation and ignition probability. It is also concluded that non-thermal plasma can successfully ignite under lean (equivalence ratio between 0.7–1.0), high-diluted mixture (25% EGR), and high-speed cross flow of 30 m/s within the range of current study.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.