Abstract
Polycrystalline nickel–zinc ferrites of chemical formula Ni 0.65-x Mg x Zn 0.35 Fe 2 O 4 (x = 0.00 to 0.2 in steps of 0.04) have been prepared by conventional ceramic technique. Calcination and sintering of all samples have been carried out in air atmosphere at 950°C and 1250°C, respectively, followed by natural cooling to room temperature. All the samples were characterized by the X-ray diffraction (XRD) for structure determination. These samples were then investigated for their magnetic and electric properties, including saturation magnetization, Curie temperature, initial permeability measurements and DC electrical resistivity. Porosity was decreased drastically from 15% to 5% showed better quality of the sintered samples. There were increments in initial permeability and DC electrical resistivity throughout the series of samples. Variations in the observed properties as a function of magnesium concentration have been discussed in light of the existing understanding.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
