Study of effective parameters on wear behavior of rubbers based on statistical methods

Abstract

This study investigates the wear, surface roughness, and temperature buildup (TBU) of styrene butadiene rubber (SBR), natural rubber (NR), and nitrile butadiene rubber (NBR) while sliding over abrasives of different sizes with the variation of normal load. Rubber properties such as tensile strength (s) and elongation at break (e) were considered as input parameters. Individual, as well as interacting effects of different parameters, were analyzed in‐depth by using statistical methods. Overall wear of rubber depends not only on the tribological system but also on mechanical properties that contribute different wear mechanisms in addition to abrasion. The abrasive particle size and 1/(se) are the first and second most significant contributing factors, respectively, to all output parameters except the wear rate where the second contributing factor is the applied load and abrasive size is the highest contributor. Larger abrasive particles deepen ploughing marks, which is enhanced by the higher load, and lead to higher surface roughness. The effect of load on TBU is negligible because of the soft nature of the rubber material.