Study of Dry Sliding Wear and Immersion Corrosion on Al 5083 Reinforced With MWCNT, MoB, and Ni

Abstract

Dry sliding wear and immersion corrosion behaviors of Al 5083-based hybrid composite reinforced with multiwalled carbon nanotube (MWCNT), Molybdenum boride (MoB) and nickel (Ni) are studied with different weight percentages. The reinforcement weight percentages of MWCNT ranges from 0 to 1.5, that of MoB from 1 to 4 and for Ni from 2 to 8. Dry sliding wear behavior at room temperature is studied using Pin on Disc by varying the sliding distances from 500 to 2000m, load from 10 to 40 N and sliding velocity from 0.25 to 1.75m/s. The wear studies revealed that there is a considerable decrease in wear rate for composites than the alloy material with increase in %wt of reinforcements for all test parameters. The worn surface analysis revealed that there are two types of wear mechanisms namely abrasive and adhesive. The uniform immersion corrosion tests also showed decreasing rate with increase in reinforcements.