Abstract
Abstract Localized Electrochemical Impedance Spectroscopy (LEIS) was used to study corrosion initiation of a cold-rolled steel panel covered by electrodeposited coating (Ecoat). LEIS technique, developed from the conventional electrochemical impedance spectroscopy (EIS) that usually measures the impedance over an area in square centimetres, can measure the impedance of a sample over a much smaller area, which makes it a more appropriate technique for studying the early stage of corrosion initiated from small defects, such as pinholes and voids in the protective coatings. In the presented study, an isolated pinhole in the coating was found first, and then the sample was immersed in a salt solution. Initiation and development of corrosion from the pinhole was closely monitored. LEIS spectra measured in different stages showed interesting variations. The corresponding equivalent circuits were introduced to study the process, followed by brief explanation of the process. The study helped us better understand the mechanism of the corrosion initiation and its early development.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.