Study of Constant Filling Pressure Conditions in a System “Nanoporous Medium - Non-wetting Liquid” in an Impact Process

Abstract

In this work critical constant filling pressure conditions for systems “nanoporous medium - non-wetting liquid” under impact were studied. To determine the conditions influencing on the occurrence of a constant filling pressure, a series of impact experiments have been carried out on four porous media with distilled water as non-wetting liquid. On the basis of the obtained experimental data for the systems under investigation, a method for determining the flow rate of liquid in the pores was developed and its values for the systems under investigation in a given range of impact energies were determined. It is shown that the liquid flow rate in the pores is one of the key parameters determining the presence of a constant critical filling pressure. It was also found that in the investigated energy range the liquid flow rate increases and goes to limit with increasing impact energy.