Abstract
This article aims to examine the behavior of Unplasticized Poly- Vinyl-Chloride (UPVC) bounded reinforced columns with polypropylene fibers under axial compression. To develop this model, a no samples of concrete filled UPVC pipe (CFUT) with different geometric properties were tested. To obtain the specimens different class pipes with three different diameters were used to investigate the sensitivity of these columns to various parameters. The effect of each variable on the ultimate strength, ductility and confinement efficiency of the samples was investigated. All specimens were compressed by applying load only to the concrete core to obtain the load-displacement variations and the corresponding deformation mode. A finite element model was developed using the proposed stress-strain variation of confined concrete with UPVC tubes to simulate axial compression of CFUT specimens. According to the results obtained, the effect of the change in diameter-thickness ratio failure stress of concrete limited by (D/t) is obtained and discussed with empirical relationship. Polypropylene fibers were found to slightly increase column strength up to a certain volume fraction, after which the strength generally experienced a decrease.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Mechanical Materials and Mechanics Research
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
