Abstract
This study adapts the geometry of CFRP used as a strengthening material to improve the shear strength of reinforced concrete corbels. The experimental work investigated using CFRP with specific geometry that focused on the size and magnitude of CFRP installation. The sizes are (1/3, 2/3 & full) the height of the cross-section, and the magnitude represented by multi-layers of CFRP. The results of the experimental work revealed that the performance of the CFRP near the neutral axis most contributed to the increase in the shear with 33.6 % in the middle third compared to 46.25 % for fully strengthened. The results also showed that using the second layer of CFRP was less efficient than the first layer due to debonding between the strips and the concrete surface before the rupture of the CFRP strips.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.