Abstract
The use of unconventional synthesis methods in the formation of CaO·2Al2O3 (CA2) is justified because it reduces the formation temperature of the compound. CA2 is formed by classical method at temperatures above 1,400 °C. The polymeric precursor method allows a significant temperature decrease in CA2 synthesis reaching temperatures of 1,000 °C. This paper deals with CA2 synthesis by “citrate” method which is often presented as Pechini method, starting from a mixture of citric acid, ethylene glycol and calcium, and aluminum nitrates. A method based on the formation of a polymeric precursor was also used, starting from a mixture of acrylic acid and nitrates of calcium and aluminum. The results showed a net difference in favor of samples obtained from acrylic acid, which by annealing at 800 °C for 1 h, contain pure CA2. The samples obtained from citric acid, after annealing at 800 °C are amorphous. After annealing at 900 °C in all samples CA2 is single phase.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.