Abstract
In the present study, focusing on characterizing the bubble-induced agitation (turbulence), spatially varying flow statistics of gas and liquid phases in laminar upward bubbly flows (Reynolds number of 750) with varying mean void fraction are investigated using a two-phase high-speed particle image velocimetry. As the flow develops along the vertical direction, bubbles with small-to-moderate void fractions, which were intentionally distributed asymmetrically at the inlet, migrate fast and show symmetric distributions of wall or intermediate peaking. Meanwhile, the mean liquid velocity saturates relatively slowly to a flat distribution at the core region. Despite small void fractions considered, the bubbles generate a substantial turbulence, which increases with increasing mean void fraction. Interestingly, it is found that the mean vertical velocity, bubble-induced normal stress in radial direction, and Reynolds stress profiles match well with those of a single-phase turbulent flow at a moderate Reynolds number (e.g., 104), indicating the similarity between the bubble-induced turbulence and wall-shear-generated turbulence in a single-phase flow. Previously suggested scaling relations are confirmed such that the mean bubble rise velocity and bubble-induced normal stress (in both vertical and radial directions) scale with mean volume void fraction as a power of −0.1 and 0.4, respectively. Finally, based on the analysis of measured bubble dynamics (rise in an oscillating path), a theoretical model for two-phase turbulent (Reynolds) stress is proposed, which includes the contributions by the non-uniform distributions of local void fraction and relative bubble rise velocity, and is further validated with the present experimental data to show a good agreement with each other.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.