Abstract
The influence of bake hardening (BH) effect on laser welded hot rolled ferrite-bainite dual phase steel (FBS) with respect to the process conditions was investigated. The samples were firstly laser welded and then pre-strained. Pre-strained the samples with defined degrees of deformation and a subsequent aging treatment leads to enhanced hardness and strengthening for both conditions. The microstructure of the fusion zone (FZ) and heat affected zone (HAZ) was studied. A high volume fraction of martensite could be observed in the FZ as well as in the HAZ. Both steels exhibited a clear BH effect in both, the as-received and the laser welded conditions. The BH effect is more pronounced in the pre-strained laser welded condition.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.