Abstract
AbstractSingle‐chamber solid oxide fuel cell (SC‐SOFC) microstacks with V‐Shaped congener‐electrode‐facing configuration were fabricated and operated successfully in a box‐like stainless steel chamber. Two gas channels with small gas inlets were used to transport the fuel and oxygen to the anodes and cathodes, respectively. The temperature of an anode‐facing‐anode two‐cell stack was higher than that of a cathode‐facing‐cathode two‐cell stack during the test procedure. For a three‐cell stack, the cell in the middle region presented the highest power output. The open circuit voltage (OCV) and maximum power output of the three‐cell stack in a gas mixture of 100 sccm N2, 120 sccm CH4, and 80 sccm O2 were 3.0 V and 413 mW, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
