Abstract
A novel demodulation method for Fiber Bragg Grating (FBG) sensor based on matching grating demodulation is proposed. It is means using several fiber gratings to cascade, and programming to make the computer automatically select different wavelengths. So that it can expand demodulation range based on high sensitivity. The photoelectric detector (PD) makes the reflected light intensity which form FBG change into voltage. And the voltage is amplified to 0~5v by amplifying circuit. Then through the data collection box, voltage sent to computer for data acquiring. Real-time analysis data and display the variable of center wavelength for sensing FBG. Because the same type of sensing FBG and demodulation FBG, they have the same temperature drift, so it can control the influence of environmental temperature. Therefore, this system can successfully solve the temperature/strain cross-sensitivity issue. The experimental results show that it is feasible to demodulate wavelength using the cascaded FBG. And the experimental measuring wavelength error is less than 0.009 nm, the measuring micro-strain error is less than 7.5με.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
