Study Deformability Ecological Steel (41Cr4)

Abstract

In this paper is studied the hot plastic deformability (plasticity and resistance to deformation) for the low-alloyed steel of heat treatment for mechanical engineering in two ways: compression and tension. Groups of low alloy steels is very important in terms of quality and quantity, the products of these steels have developed internal and external market. The plasticity variation were plotted with the temperature and it was established that the plasticity of the steel increases in the range 700-12000C, then decreases as a result of the firing of the grain boundaries, for the bars obtained from ingot and continuous cast blown it was noticed that the plasticity values are very close. Deformation resistance decreases as the temperature increases. The finest granulation was obtained for a final plastic deformation temperature of 8000C and a minimum degree of deformation of 45%.