Study and optimization of the thermal performances of the offset rectangular plate fin absorber plates, with various glazing

Abstract

The low thermophysical characteristics of air used as a heat transfer fluid in the solar collectors with thermal conversion require a fully developed turbulent flow. This increases the thermal heat transfer between the absorber plate and the fluid, which clearly improves the thermal performances of the solar collector with obstacles arranged into the air channel duct. In the present work, we introduce, in solar collector, the offset rectangular plate fins, which are used in heat exchangers. An experimental investigation carried out showed the generated enhancement of thermal performance. The offset rectangular plate fins, mounted in staggered pattern, are oriented parallel to the fluid flow and are soldered to the underside of absorber plate. They are characterized by high heat transfer area per unit volume. High thermal performances are obtained with low pressure losses and in consequence a low electrical power consumption by the fan in comparison to the flat plate collector. The experimental results are all so compared by using two types of transparent cover; double and triple.