Abstract
The water modelling experiments of 300 t converter concerning combined blowing parameters, the number, and configuration of bottom nozzles are carried out. The results show that the arrangement of 16 bottom nozzles at 0. 40D and 0. 45D (hearth diameter) concentric circles is the reasonable solution. The combined blowing steelmaking technique of 300 t converter has been developed through experiments and studies relating to optimizing the top-bottom combined blowing pattern, the number and configuration of the bottom nozzles, the type selection of bottom nozzle, and bottom nozzle maintenance techniques. The results show that the product of w[c] • w[o] at endpoint is reduced from 0.00262 to 0.00243, average TFe content is decreased by 2%, phosphorus distribution is raised from 70. 85 to 78. 95, sulfur distribution is raised from 3.43 to 4.32 and manganese content is raised by 0. 02%.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
