Abstract
Silica xerogel films with good uniformity and various thicknesses were successfully prepared by a two-step acid-base catalyst procedure and spin coating. After the addition of ammonia catalyst, the sol changes gradually from a Newtonian fluid to a shearthinning one due to the progress of polymerization reactions. An empirical equation using the relative ratio of reaction time to gel time can give successful prediction of sol viscosity. Our systematic study of the coating process indicates the existence of a process window in terms of t/tgel and spin speed can be defined for obtaining uniform and defect-free films. It is difficult to obtain films with good quality when the viscosity of the sol is either too high or too low. Another parameter that also exhibits strong influence on film thickness is the concentration of TEOS in the starting solution. Finally, the film thickness was found to correlate well with sol viscosity and spin speed as h=A � 0.45 $ � 0.62 . # 2002 Elsevier Science Ltd and Techna S.r.l. All rights reserved.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
