Abstract

Dissolving pulps are the raw materials for the production of many different end-products. Jute is a very good source of cellulose. In this investigation, jute fiber was subjected to pulping in soda process in order to produce dissolving pulp under different prehydrolysis conditions and compared with prehydrolysed kraft pulp from jute. An increase of the prehydrolysis temperature or H2SO4 in prehydrolysis liquor increased the α-cellulose content and decreased the viscosity of pulp. The effect of ethylenediamine in soda liquor was also investigated when producing dissolving pulp. Jute fiber produced pulp having 90–97% α-cellulose. Ethylenediamine in soda liquor produced pulp of higher yield, viscosity and higher α-cellulose content than that of prehydrolysis soda or kraft pulp. The α-cellulose content and viscosity were increased with the increase of amine in soda liquor. The kappa number of dissolving pulp from jute was very low (9–5), which indicated that less bleaching chemicals are required for bleaching. The bleachability of soda-ethylenediamine pulp was lower than prehydrolysed soda and kraft pulp in ECF bleaching sequences. The bleachability of soda-ethylenediamine pulp was improved at the sacrifice of pulp yield when prehydrolysis was done prior to pulping. The alkali solubility S10 and S18 were 4–9 and 2–4%, respectively.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.