Studies on the effect of electrode plate position and feed temperature on the tribo-electrostatic separation of high ash Indian coking coal

Abstract

Investigations were carried out to understand the design aspects of tribo-electrostatic separator to separate ash from high ash Indian coking coal. Initial studies were aimed to evaluate the different physical, chemical and electrical properties of quartz, kaolinite, and carbon particles. The significant design variables such as plate angle and plate gap were evaluated to effect the optimum separation. The absolute charge acquired by quartz, kaolinite, and carbon were observed to be different. The results indicate that the magnitude of charge increases with the increase in the time of tribo-charging using copper tribo-charging medium. A mathematical model was formulated based on design and operating parameters of the experimental set up to simulate the particle trajectories. The particle trajectories were simulated using measured physical and electrical properties of mineral and carbon particles at experimental design and operating conditions. The simulated trajectories were validated with experimental data. The results of plate position and feed particle temperature indicated that there were optimum conditions to achieve the desired performance. The simulation and experimental results were in good agreement. The optimum separation was achieved at plate inclination of 5°. It was possible to reduce ash content by 10% at 61% yield. Better quality clean coal at 33% ash was achieved from 53% ash feed coal with lower yield.