Abstract

In the present study, the stress-stain behaviour of confined concrete made with basalt fibre reinforced polymer bars (BFRP) were taken up. The stress-strain behaviour was studied for the concrete mixes confined with steel rebars and BFRP rebars. The confinement was given in the form of steel hoops in the cylinders, 3 hoops (0.8%), 4 hoops (1.1%), 5 hoops (1.3%) and 6 hoops (1.6%). The addition of basalt fibres along with confinement of concrete with steel and BFRP hoops enhanced the compressive strength, indicating further confinement effect in the concrete. It is observed that the addition of fibres is helpful in lower confinements only. Beyond 1.1% confinement, the addition of any type of basalt fibres doesn’t show any effect on compressive strengths. From the stress-strain behaviour of all types of concrete mixes, it is concluded that the ultimate load-carrying capacity and strains at peak stresses are more in concrete with BFRP hoops for mixes up to 1.1% confinement. The addition of basalt fibres to concrete has increased the ductility in both confined and unconfined states

Highlights

  • The Studies on Stress-Strain behaviour of concrete are essential in determining the parameters like energy absorption, toughness, plasticity index and they are very useful in design of structures using such concretes

  • The stress-stain behaviour of confined concrete made with basalt fibre reinforced polymer bars (BFRP) were done. In this phase of investigations, the stress-stain behaviour of concrete confined by steel and BFRP rebars were taken up

  • From the stress-strain behaviour of all types of FRSCC, it is concluded that the ultimate load-carrying capacity and strains at peak stresses are more in SFRSCC and HFRSCC for mixes up to 1.1% confinement

Read more

Summary

Introduction

The Studies on Stress-Strain behaviour of concrete are essential in determining the parameters like energy absorption, toughness, plasticity index and they are very useful in design of structures using such concretes. Further modelling the stress-strain behaviour helps in predicating their behaviour. The stress-stain behaviour of confined concrete made with basalt fibre reinforced polymer bars (BFRP) were done

Methodology
Findings
Conclusions
Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.