Abstract

The meta-crystals concept is an approach that consists of using both undoped and properly doped heavy crystal fibers of identical material as the active medium of a calorimeter. The undoped fibers behave as Cherenkov radiators while the doped ones behave as scintillators. A dual readout calorimeter can be built with its sensitive volume composed of a mixture of both types of crystals. In addition if the calorimeter is adequately finely segmented it can also function as a particle flow calorimeter at the same time.In this way one could possibly combine the advantages of both the particle flow concept and the dual readout scheme.We discuss the approach of dual readout calorimetry with meta-crystals made of Lutetium Aluminium Garnet (LuAG).We briefly present studies on the material development and first testbeam activities and then focus on performance expectation studies based on simulation. We discuss in more detail the results from generic systematic scannings of the design parameters of a dual readout calorimeter. The parameters under study include the transverse and longitudinal granularity, the sampling frequency and readout fraction of the scintillation and the Cherenkov signals, the total calorimeter length, the mixture of homogeneous and sampling dual readout components, their corresponding composition etc. We close with a brief outlook on open issues and further R&D needed to proceed from an ideal conceptual case to the design of a realistic detector.

Highlights

  • The meta-crystals concept is an approach that consists of using both undoped and properly doped heavy crystal fibers of identical material as the active medium of a calorimeter

  • Fibers and can be attached to both ends of the unit. The development of such a concept requires a comprehensive program of R&D studies in various areas, from material development and crystal fiber production to simulation studies, testbeam activities and prototyping

  • A candidate material under study to be used for this concept is the Lutetium Aluminium Garnet Lu3Al5O12 (LuAG) crystal

Read more

Summary

Material development and related studies

A candidate material under study to be used for this concept is the Lutetium Aluminium Garnet Lu3Al5O12 (LuAG) crystal. The University of Lyon in collaboration with Fibercryst-Lyon have improved the method and applied it successfully to the production of fibers made of LuAG and other crystal materials [4] With this method crystal fibers with diameter between 0.3 and 3 mm and length up to 2 m can be produced. The pulling rate is ranging from 0.1 to 0.5 mm/min and is considerably faster than the traditional methods, about a factor 10 and 50 times faster than Czochralski and Bridgman-Stockbarger method respectively. Another advantage of this technique is the fact that the capillary die can be non-cylindrical e.g. square, hexagonal etc, and so fibers with these shapes in cross-section can be produced as well. Example of the series of measurements we perform on a sample to study its properties with respect to light transmission, excitation-emission, attenuation, diffusion etc for optical characterisation and further development of the crystal material [5]

Testbeam activities
Findings
Simulation studies
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call