Studies on polybenzimidazole/poly (4‐vinylpyridine) blends and their proton conductivity after doping with acid

Abstract

AbstractIn the present work, polybenzimidazole (PBI) and poly(4‐vinylpyridine) (P4VP) were chosen because they form miscible blends and both materials are suitable for acid doping as a matrix, which can eventually be used as proton conductor. The miscibility and inter‐polymer interactions were studied by infrared (IR) spectroscopy and differential scanning calorimetry (DSC). DSC and IR results suggest that PBI blended with P4VP exhibits good miscibility due to the strong hydrogen bonds formed between PBI's NH groups and P4VP's N: groups. The glass transition temperatures of the blends can be fitted to the Fox equation very well. The blends were also studied by thermogravimetry. Their thermal stability is slightly higher than that of P4VP, but is still lower than that of PBI. Temperature‐dependent conductivity of acid‐doped PBI/P4VP blends was studied. As the temperature increases, the conductivity of PBI/P4VP doped with H3PO4 increases. The temperature‐dependent conductivity of the blends follows a simple Arrhenius relationship when the P4VP content is low (less than 15%), while a non‐Arrhenius behaviour of the conductivity of the blends becomes more and more significant with increasing P4VP content. This means that the proton transport in the blends is controlled by both a hopping mechanism and the segmental motion of the polymer. The contribution of these two mechanisms depends on the P4VP content. Copyright © 2003 Society of Chemical Industry