Studies on natural weathering of rattan powder-filled natural rubber composites

Abstract

This article investigates the effect of natural weathering on mechanical and morphological properties of rattan powder-filled natural rubber (NR) composites as a function of filler loading and silane coupling agent. The rattan powder samples in the range of 0 to 30 phr were compounded with NR using a laboratory size two-roll mill. The natural weathering test was carried out for six months. The degradation of the samples was evaluated by performing a tensile test, a Fourier transform infrared spectroscopy (FTIR), and a scanning electron microscopy (SEM) test. The results indicated that after natural weathering, an increase in stress at 100% elongation (M100) can be seen for samples without the silane coupling agent, whilst M100 was reduced for samples with silane coupling agent. A drastic reduction in tensile strength and elongation at break were observed for all samples due to the photo-oxidation process that occurred during the degradation of the samples. The extent of degradation on the samples’ surfaces and the presence of oxygenated products were confirmed by SEM and FTIR studies, respectively.