Abstract
AbstractOn‐line measurement was performed in the high‐speed spinning of flat, hollow, and circular fibers of poly(ethylene terephthalate), paying particular attention to the change in cross‐sectional shape along the spin line. The diameter profiles of hollow and circular fibers were essentially identical, whereas the deformation of flat fiber shifted to the region closer to the spinneret. The necklike deformation of hollow and circular fibers started at the takeup velocity of 5 km/min. In the case of flat fibers, presence of the necklike deformation was confirmed at 4 km/min, and extremely steep diameter attenuation was observed at 5 km/min. The spin‐line tension of the flat fiber was also larger than that of circular fibers. Combined measurements of fiber velocity and thickness enabled us to evaluate the aspect ratio of the flat fiber and hollow ratio of the hollow fiber in the spin line. These two factors were found to decrease steeply near the spinneret. Accordingly, the thinning of the spin line and the change in cross‐sectional shape appeared to proceed independently. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 1582–1588, 2001
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
